Type="BuildWizard"
Version=6

[Base Plate]
Checked=true
Thickness=0.3
Type="Тень"
Type=-3
Parts="Детали только с поддержками"
Parts=-3
Placement="Под"
Placement=-2
Engraved=false

[Base Plate/Hole]
Shape="Шестиугольный"
Shape=1
Diameter=2.5
Wall Thickness=1.0

[Miscellaneous]
Antialiasing=true
Fast Print Mode=true
Separation Detect=true

[Parameters]
size=2

[Parameters/1/Print Range]
Start=0.0
End=0.05
End=0.1

[Parameters/1/General]
Slice Thickness=0.05
Heater Temperature=0.0
Heater Temperature=35.0
Minimum Temperature=35.0
Heater Enable=1.0

[Parameters/1/Curing]
Light Intensity=9.92
Light Intensity=7.0
Light Intensity Control=1.0
Exposure Time=9.814
Exposure Time=15.143
Fill Exposure=100.0
Z Compensation=0.3
Z Compensation=0.0
XY Compensation=0.0
XY Compensation=-0.01
Support Exposure=100.0
Fill Noise=0.0
Border Exposure=100.0
Border Width=0.0
Border Noise=0.0
Two-Step Exposure Border Width=0.0

[Parameters/1/Mechanics]
Separation Velocity=4.3
Separation Velocity=2.475
Separation Acceleration=0.0
Separation Deceleration=0.0
Separation Deceleration=18.0
Separation Distance=10.0
Separation Detect Window=0.0
Separation Detect Window=10.0
Separation Detect Window Time=0.0
Separation Detect Window Time=0.4
Separation Detect Hard Stop=1.0
Separation Pressure Limit=300.0
Approach Velocity=4.3
Approach Acceleration=0.0
Approach Acceleration=18.0
Approach Deceleration=0.0
Approach Deceleration=18.0
Approach Pressure Limit=100.0
Tare Interval=0.001
Tare Interval=0.3
Pressure Hysteresis=5.0
Layer Tolerance=30.0
Viscosity Range=1.0
Viscosity Range=0.629
Motor Timeout=300.0
Motor Timeout=60.0
Traverse Timeout Range=0.1

[Parameters/1/Delays]
Wait Time (After Exposure)=2.0
Wait Time (After Separation)=5.0
Wait Time (After Separation)=3.0
Wait Time (After Approach)=0.0

[Parameters/2/Print Range]
Start=0.05
Start=0.1
End=40.908

[Parameters/2/General]
Slice Thickness=0.05
Heater Temperature=0.0
Heater Temperature=35.0
Minimum Temperature=35.0
Heater Enable=1.0

[Parameters/2/Curing]
Light Intensity=9.92
Light Intensity=7.0
Light Intensity Control=1.0
Exposure Time=3.1
Exposure Time=1.429
Fill Exposure=100.0
Z Compensation=0.3
Z Compensation=0.0
XY Compensation=0.0
XY Compensation=-0.01
Support Exposure=100.0
Fill Noise=0.0
Border Exposure=100.0
Border Width=0.0
Border Noise=0.0
Two-Step Exposure Border Width=0.0

[Parameters/2/Mechanics]
Separation Velocity=4.3
Separation Velocity=2.475
Separation Acceleration=0.0
Separation Deceleration=0.0
Separation Deceleration=18.0
Separation Distance=10.0
Separation Detect Window=0.0
Separation Detect Window=10.0
Separation Detect Window Time=0.0
Separation Detect Window Time=0.4
Separation Detect Hard Stop=1.0
Separation Pressure Limit=300.0
Approach Velocity=4.3
Approach Acceleration=0.0
Approach Acceleration=18.0
Approach Deceleration=0.0
Approach Deceleration=18.0
Approach Pressure Limit=100.0
Tare Interval=0.001
Tare Interval=0.3
Pressure Hysteresis=5.0
Layer Tolerance=30.0
Viscosity Range=1.0
Viscosity Range=0.629
Motor Timeout=300.0
Motor Timeout=60.0
Traverse Timeout Range=0.1

[Parameters/2/Delays]
Wait Time (After Exposure)=0.1
Wait Time (After Exposure)=0.5
Wait Time (After Separation)=0.0
Wait Time (After Approach)=0.0