Type="BuildWizard"
Version=3

[Base Plate]
Thickness=0.3
Type="Тень"
Type=-3
Placement="На одном уровне"
Placement=-3
Engraved=false
Supported Only=true

[Base Plate/Hole]
Shape="Шестиугольный"
Shape=1
Diameter=2.5
Wall Thickness=1.0

[Miscellaneous]
Antialiasing=false
Traverse Timeout Range=0.3
Separation Detect=true
Fast Print Mode=false

[Parameters]
size=2

[Parameters/1/Print Range]
Start=0.0
End=0.1

[Parameters/1/General]
Slice Thickness=0.05
Heater Temperature=0.0
Heater Temperature=35.0
Minimum Temperature=30.0
Heater Enable=1.0

[Parameters/1/Curing]
Light Intensity=7.0
Light Intensity Control=1.0
Exposure Time=11.893
Exposure Time=10.0
Z Compensation=0.222
XY Compensation=-0.05
Support Exposure=100.0
Fill Exposure=100.0
Fill Noise=0.0
Border Exposure=100.0
Border Width=0.0
Border Noise=0.0
Two-Step Exposure Border Width=0.0

[Parameters/1/Mechanics]
Separation Velocity=2.475
Separation Acceleration=10.0
Separation Deceleration=0.0
Separation Distance=8.0
Separation Detect Window=0.0
Separation Detect Window=10.0
Separation Detect Window Time=0.0
Separation Detect Window Time=0.4
Separation Detect Hard Stop=1.0
Separation Pressure Limit=300.0
Approach Velocity=3.8
Approach Acceleration=0.0
Approach Deceleration=0.0
Approach Pressure Limit=100.0
Tare Interval=0.001
Pressure Hysteresis=5.0
Layer Tolerance=30.0
Viscosity Range=1.0
Motor Timeout=150.0
Traverse Timeout Range=0.3

[Parameters/1/Delays]
Wait Time (After Exposure)=1.0
Wait Time (After Separation)=0.0
Wait Time (After Approach)=10.0

[Parameters/2/Print Range]
Start=0.1
End=15.767

[Parameters/2/General]
Slice Thickness=0.05
Heater Temperature=0.0
Heater Temperature=35.0
Minimum Temperature=30.0
Heater Enable=1.0

[Parameters/2/Curing]
Light Intensity=7.0
Light Intensity Control=1.0
Exposure Time=2.435
Exposure Time=1.0
Z Compensation=0.0
XY Compensation=-0.005
XY Compensation=-0.035
Support Exposure=100.0
Fill Exposure=100.0
Fill Noise=0.0
Border Exposure=100.0
Border Width=0.0
Border Noise=0.0
Two-Step Exposure Border Width=0.0

[Parameters/2/Mechanics]
Separation Velocity=2.475
Separation Acceleration=10.0
Separation Deceleration=0.0
Separation Distance=8.0
Separation Detect Window=0.0
Separation Detect Window=10.0
Separation Detect Window Time=0.0
Separation Detect Window Time=0.4
Separation Detect Hard Stop=1.0
Separation Pressure Limit=300.0
Approach Velocity=3.8
Approach Acceleration=0.0
Approach Deceleration=0.0
Approach Pressure Limit=100.0
Tare Interval=0.001
Pressure Hysteresis=5.0
Layer Tolerance=30.0
Viscosity Range=1.0
Motor Timeout=150.0
Traverse Timeout Range=0.3

[Parameters/2/Delays]
Wait Time (After Exposure)=0.0
Wait Time (After Separation)=0.1
Wait Time (After Approach)=1.0